Comparer Les Prix

Les gants Sand 4 H2O sont incontournables pour quiconque refuse de laisser la grisaille et le risque d´averse se mettre en travers de ses projets motocyclistes. Ces gants sont spécialement conçus pour circuler sur route ou en tout-terrain par des conditions instables au printemps, en été ou à l´automne. Ils s´inspirent de nos célèbres gants Sand 4, mais l´équipe de design a troqué la ventilation pour l´imperméabilité. Cela est rendu possible par l´intégration d´une membrane en Z hydratex® étanche et respirante. Ce modèle offre la même dextérité et la même maîtrise du guidon et des commandes que les Sand 4, tout en s´assurant que vos mains restent au sec jusqu´à destination. Le dessus du gant intègre un matériau extensible pour favoriser la souplesse et la liberté de mouvement. Il reçoit aussi une nouvelle protection du poing en TPR dessinée spécialement pour ces gants. Les sliders en TPR des doigts, du pouce et de la paume apportent une protection additionnelle. La languette rugueuse de la manchette facilite grandement l´enfilage de ces gants que vous pourrez attacher fermement grâce à leur fermeture du poignet auto-agrippante. Nous avons également ajouté des dispositifs réfléchissants pour être davantage visible par mauvais temps ou de nuit. L´Empreinte Conductrice intégrée rend possible la manipulation d´écrans tactiles sans avoir à retirer ses gants si vous désirez par exemple modifier votre itinéraire en cours de route. Roulons sous la pluie !

Voir

Revit Gants Rev´it Sand 4

61.99 EUR

Les gants Sand 4 ont beau avoir été imaginés pour s´accorder avec la tenue Sand 4 H2O, ils risquent fort de séduire un large public de motards aventuriers de par le monde. Cette paire protectrice, dessinée et conçue pour une utilisation estivale, offre un grip optimal, un haut pouvoir respirant et une ventilation efficace. Ces gants sont confectionnés à partir de tissus à mailles extensibles résistants à l´abrasion conjugués à une protection du poing high-tech en TPR qui redirige l´air vers l´intérieur des gants et les mains du pilote, pour s´assurer de les garder au frais et au sec lors des virées par temps chaud. De multiples perforations sur l´intérieur et l´extérieur augmentent encore un peu plus la respirabilité. Nous avons ajouté des protections en TPR sur les doigts et les pouces pour renforcer la protection sans nuire au confort ni à la souplesse. Un slider de paume en TPR permet de contrôler la glisse en cas de chute. Les gants s´enfilent facilement grâce à la languette sur la manchette puis s´attachent grâce à la sangle auto-agrippante au poignet. Modifier son itinéraire en cours de route devient un jeu d´enfant grâce à l´Empreinte Conductrice intégrée qui rend possible la manipulation d´écrans tactiles sans avoir à retirer ses gants. Profitez de la brise estivale avec les gants Sand 4.

Voir

Revit Gants Off-road Rev´it Sand 4 H2o

74.49 EUR

Voir

Revit Gants Rev´it Sand 4

68.49 EUR

Voir

Revit Gants Rev´it Sand 4

61.99 EUR

Voir

Revit Pantalon Rev´it Sand 4 H2o

284.49 EUR

Le Sand 4 H2O Ladies est un pantalon de moto pour femmes incroyablement polyvalent grâce auquel les aventurières les plus intrépides pourront explorer les meilleures routes et pistes du monde à deux-roues, dans tous les environnements et en toute saison.Comme la veste éponyme, le pantalon Sand 4 H2O Ladies dispose d´un équipement digne d´un couteau suisse. L´enveloppe consiste en une couche légère mais hautement résistante à l´abrasion équipée de protections de hanches SEESMART™ CE-niveau 1 et de protections de genoux SEEFLEX™ CE-niveau 2 ajustables. En-dessous, on trouve la membrane hydratex® étanche, respirante et amovible, garante de votre confort par mauvais temps. Pour couronner le tout – et vous permettre d´affronter des conditions plus froides – nous avons aussi installé une doublure thermique amovible.Une fois les deux doublures démontées, vous pouvez diriger l´air sur vos jambes en ouvrant les zips VCS situés à côté des poches étanches dissimulées, qui offrent suffisamment d´espace pour emmener tout le nécessaire. Les zips des poches font en sorte que vos effets personnels restent à leur place. Des sangles de réglage au niveau des hanches permettent d´ajuster au mieux le pantalon à votre morphologie, avec ou sans les doublures. Les sangles et languettes aux mollets et chevilles permettent d´adapter la coupe selon le type de bottes utilisées.La zone de grip à l´arrière du pantalon Sand 4 H2O Ladies empêche de glisser sur la selle à l´accélération ou lors d´un freinage. Les bandes réfléchissantes aux mollets aident à rester visible dans l´obscurité. Roulez plus loin.

Voir

Revit Gants Rev´it Sand 4

58.49 EUR

Voir

Revit Pantalon Rev´it Sand 4 H2o

249.99 EUR

Le Sand 4 H2O est un pantalon de moto incroyablement polyvalent grâce auquel les aventuriers les plus intrépides pourront explorer les meilleures routes et pistes du monde à deux-roues, dans tous les environnements et en toute saison. Comme la veste éponyme, le pantalon Sand 4 H2O dispose d´un équipement digne d´un couteau suisse.L´enveloppe consiste en une couche légère mais hautement résistante à l´abrasion équipée de protections de hanches SEESMART™ CE-niveau 1 et de protections de genoux SEEFLEX™ CE-niveau 2 ajustables. En-dessous, on trouve la membrane hydratex® étanche, respirante et amovible, garante de votre confort par mauvais temps. Pour couronner le tout – et vous permettre d´affronter des conditions plus froides – nous avons aussi installé une doublure thermique amovible. Une fois les deux doublures démontées, vous pouvez diriger l´air sur vos jambes en ouvrant les zips VCS situés à côté des poches étanches dissimulées, qui offrent suffisamment d´espace pour emmener tout le nécessaire. Les zips des poches font en sorte que vos effets personnels restent à leur place. Des sangles de réglage au niveau des hanches permettent d´ajuster au mieux le pantalon à votre morphologie, avec ou sans les doublures. Les sangles et languettes aux mollets et chevilles permettent d´adapter la coupe selon le type de bottes utilisées. La zone de grip à l´arrière du pantalon Sand 4 H2O empêche de glisser sur la selle à l´accélération ou lors d´un freinage. Les bandes réfléchissantes aux mollets aident à rester visible dans l´obscurité. Roulez plus loin.

Voir

Revit Pantalon Rev´it Sand 4 H2o

190.99 EUR

Voir

Revit Pantalon Rev´it Sand 4 H2o

278.99 EUR

Voir

Tamiya Mini 4WD REV Series Mach Frame Chassis Plastic Model 18714 No.14 FM-A

55.95 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Parts configuration that attaches three divided cowls around a bike-like frame. Features a novel style that incorporates the FM-A chassis as part of the design. FM-A chassis is made of metallic gray ABS resin Part A is made of black low-friction resin. Super hard small-diameter low-height tires are set on white A-spoke wheels. Battery type: 2 AA batteries (batteries are sold separately and must be purchased separately) A plastic model that requires assembly and painting. Separate adhesive, tools, paint, etc. are required. Battery type: Batteries are sold separately and must be purchased separately.

Voir

NOBU JAPAN Hobby Design Mazda Detail Up Set Tamiya 1/24 MX-5 HD02-0335

81.62 EUR

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. A set of 1/24 scale photo-etched parts for advanced users. A separate kit is required for assembly. This product is not a plastic model. This is a photo-etched parts transformer kit for advanced users.

Voir

Tamiya Mini 4WD REV Series Aero Avante 18701 No.01 (AR Chassis)

61.17 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Assembly is a snap-in type that does not require adhesive. Separate tools are required to install the parts. Completed size: total length 155mm, total width 97mm with motor The Aero Avante has its roots in the famous car Avante Jr. Inheriting the image of the first-generation Avante Jr., the design pursues aerodynamics that is worthy of the Aero name. *This kit does not include batteries. Two AA batteries are required for operation.

Voir

Tamiya Locomotive à vapeur allemande Italeri BR41 modèle en plastique IT8701 1/87

105.81 EUR

【Compatibilité de tension】 Lorsque vous utilisez des appareils électriques, veuillez noter qu'ils sont conçus pour les spécifications de tension japonaises (90-110V), donc si vous les utilisez avec une tension différente, cela peut provoquer un dysfonctionnement. 【Type de prise】 Nos produits utilisent des types de prises japonaises (Type A ou B). Veuillez utiliser un adaptateur de conversion si nécessaire. 【Remarque importante sur les transformateurs et les adaptateurs】 Un transformateur ajuste la tension pour correspondre aux besoins de votre appareil. Un adaptateur de conversion modifie uniquement la forme de la prise et n'ajuste pas la tension. L’utilisation d’un seul adaptateur de conversion sans transformateur peut endommager le produit. 【Responsabilité】 Nous ne sommes pas responsables des dysfonctionnements ou des dommages causés par une mauvaise utilisation, comme l'utilisation du produit sans transformateur. Une maquette en plastique qui nécessite assemblage et peinture. Outils séparés, peinture, etc.. sont requis.

Voir

Tamiya Locomotive à vapeur allemande Italeri BR41 modèle en plastique IT8701 1/87

108.18 EUR

Nous proposons une grande variété de produits, et les précautions suivantes s'appliquent à certains d'entre eux. Veuillez noter qu'ils sont répertoriés pour tous les produits. 【Compatibilité de tension】Conçu pour la tension japonaise (90-110V). L'utilisation d'une tension différente peut provoquer un dysfonctionnement. 【Type de prise】Prises japonaises (Type A ou B). Utilisez un adaptateur de conversion si nécessaire. 【Transformateurs et adaptateurs】Les transformateurs ajustent la tension; les adaptateurs ne changent que la forme de la prise. L'utilisation d'un adaptateur sans transformateur peut endommager le produit. 【Responsabilité】Nous ne sommes pas responsables des dommages causés par une mauvaise utilisation, comme l'utilisation du produit sans transformateur. Une maquette en plastique qui nécessite assemblage et peinture. Outils séparés, peinture, etc.. sont requis.

Voir

Zen Picks - Japan Product select - Tamiya Mini 4WD REV Series Mini 4WD Starter Pack AR Speed Type Aero Avante 18706 No.06

75.33 EUR

---------------------------------------------------------------------- Une maquette en plastique qui nécessite assemblage et peinture. Outils séparés, peinture, etc.. sont requis. Taille terminée: longueur totale 157 mm, largeur totale 104 mm, hauteur totale 46 mm Spécification spéciale qui comprend des pièces de base et des outils tels que des tournevis dans un seul ensemble. Avec moteur Rev Tune 2 Deux piles AA sont nécessaires séparément pour le fonctionnement. L'image montre le kit assemblé et peint. Type de batterie: Les piles sont vendues séparément et doivent être achetées séparément.

Voir

JP Create mege Italeri Tamiya Airplane Series Lightning II Plastic Model 38103 IT2810 1/48 No.2810 F-35B

179 EUR

--------------------------------------------------------------------------------- Sold and shipped by Japanese sellers * Operated by Japanese sellers - Japanese sellers with trust and experience. * Direct from Japan - All items are carefully packed and shipped promptly from Japan. * Highest quality control - Inspected by Japanese standards to ensure high quality products. --------------------------------------------------------------------------------- A plastic model that requires assembly and painting. Separate adhesive, tools, paint, etc. are required. 1/48 scale unpainted plastic assembly kit Completed size: Total length 321mm Italeri modeled an advanced appearance with a completely new design Five types of cult graph decals are included.

Voir

StarTech.com Armoire Réseau Murale 9U à 2 Montants avec Étagère 1U, Baie Serveur Murale 19' pour Données/Réseau/AV/Électronique/Équipement IT, Petite

410.77 EUR

Assemblage requis : NonCapacité de charge maximale : 90 kgCapacité du rack : 9UCertification : CE, REACH

Voir

Tamiya Airbrush System Spray Work Painting Stand Set 74522 No.22

71.49 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Best used in combination with a painting booth. Rotating painting stand convenient for airbrush painting and spray painting. The set includes two types: a table and a stand. The turntable has a diameter of 16cm. Target gender: unisex

Voir

Tamiya Military Miniature Series German Army Infantry Set French Front Plastic Model 35293 1/35 No.293

53.69 EUR

Voir

Tamiya Detail Up Parts Series Japanese Navy Battleship Yamato 46cm Cannon Metal Barrel Cannonball Set Plastic Model Parts 12643 1/350 No.43

56.41 EUR

Voir

Tamiya 148 Masterpiece Series No.73 US Air Force Douglas A-1J Skyraider Plastic Model 61073

78.45 EUR

Plastic models requiring assembly and painting. Separately, tools, paint, etc. are required. Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Voir

Tamiya 135 Military Miniature Series No.348 Soviet Army Self-Propelled Artillery SU-76M Plastic Model 35348

75.62 EUR

Voir

Tamiya 135 Military Miniature Series M60A1 Reactive Armor

79.22 EUR

Plastic models requiring assembly and painting. Separately, tools, paint, etc. are required. Target Age: Kids color: molding color package weight: 0.58 kg Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Voir

Tamiya Military Miniature Series British Army Small Military Vehicle 10HP Tilly Plastic Model 32562 1/48 No.62

54.49 EUR

Voir

Tamiya 148 Masterpiece Series No.87 Luftwaffe Messerschmitt Me262 A-1a Plastic Model 61087

72.38 EUR

Voir

Tamiya 135 Military Miniature Series No.210 British Army Infantry Tank Churchill Mk.VII Plastic Model 35210

72.09 EUR

Plastic models requiring assembly and painting. Separately, tools, paint, etc. are required. color: green package weight: 0.47 kg Material: plastic Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Voir

Tamiya 135 Military Miniature Series No.150 US Navy PBR31Mk.2 Piver Plastic Model 35150

81.54 EUR

Voir

Tamiya Military Miniature Series Soviet Army Tank 1937 Plastic Model 35327 1/35 No.327 BT-7

83.8 EUR

Voir

TAMIYA Military Miniature Series German Army Tank Corps Front Reconnaissance Team Plastic Model 35253 1/35 No.253

50.36 EUR

Voir

Tamiya 1100 Space Shuttle Series No.02 Atlantis Plastic Model 60402

88.52 EUR

Voir

TAMIYA Warbird Collection US Army North American Mustang Korean War Specification Plastic Model 60754 1/72 No.54 F-51D

57.8 EUR

Voir

Tamiya Makeup Material Series Polishing Tamiya Polishing Sponge Sheet 2000 Plastic Model Tool 87170 No.170 (1 piece)

48.21 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Sheet made of 5mm thick high-density polyethylene foam coated with aluminum oxide abrasive particles Useful for fixing burrs and adhesive parts on plastic models, polishing the base of wood and metal, and is especially effective for polishing curved surfaces. Can be cut with a cutter knife and can also be sharpened with water. Body size: 114mm x 140mm, thickness 5mm, 1 piece In addition to the product name, the roughness guide (number) is displayed on the back, and each roughness has a different color, making it easy to distinguish.

Voir

Tamiya Warbird Collection US Navy Vought Corsair Plastic Model 60775 1/72 No.75 F4U-1A

61.42 EUR

Voir

Tamiya Military Miniature Series French Army Infantry Set Plastic Model 35288 1/35 No.288

52.95 EUR

Voir

Tamiya Military Miniature Series Soviet Army Artillery Plastic Model 35348 1/35 No.348 Self-Propelled SU-76M

80.97 EUR

Voir

Tamiya Mini 4WD PRO Series Toyota Gazoo Racing TS050 HYBRID MA Chassis 18652 No.52 (Polycarbonate Body)

69.04 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. TS050 HYBRID mini 4WD, a prototype racing car developed by Toyota Gazoo Racing The aerodynamic form, including the raised front and rear fenders and complex side pontoons, is reproduced with a polycarbonate clear body. Adopts MA chassis with excellent drive efficiency Coloring marks are also included. Battery type: 2 AA batteries (batteries are sold separately and must be purchased separately) This product is a plastic model that requires assembly and painting. Separate adhesives, tools, paint, etc. are required for assembly and painting.

Voir

Tamiya Warbird Collection Japanese Navy Kawanishi Local Fighter Shiden Type 11 A Plastic Model 60768 1/72 No.68

60.17 EUR

Voir

Tamiya Military Miniature Series German Army Small Arms Set Plastic Model 35111 1/35 No.108

48.86 EUR

Voir

Tamiya Models Sturmgeschutz III Ausf.G Early Version Model Kit (TM35197)

71 EUR

Originally intended for infantry support duties, Germany's Sturmgeschutz (assault gun) and abbreviated StuG III first appeared in combat during 1940. It had the durable Panzer III chassis with a completely new superstructure. To keep the vehicles profile as low as possible, the revolving turret was eliminated and the short barreled 75mm L/24 gun was mounted directly onto the hull. As it was mainly intended for close fire support for the Wehrmacht, it was used as self-propelled artillery against the opposing enemy's strategic points. However, when the German forces encountered the Russian KV and T-34 tanks on the Eastern front, the situation abruptly changed. To cope with this Russian tank threat, the Germans were forced to upgrade their existing weapons systems. The G-type StuG III built from late 1942 onwards, used a more powerful, long barrel 75mm L/48 gun. The early G-type had a square shaped gun mantlet. The superstructure was redesigned and an MG42 machine gun with shield, commander's vision cupola and smoke dischargers were added. The thin steel plates, known as Schurzen (skirts) were attached to the sides of the hull beginning in the spring of 1943. The type-42 assault gun mounted a 105mm howitzer on the StugG III chassis and was developed to fulfill the StuG III's original role of infantry support. Incorporating several minor changes, about 7,800 G-type StuG III's were produced. package height : 6.4 cm package length : 35.5 cm package width : 20.5 cm Product type : NON RIDING TOY VEHICLE

Voir

Tamiya World Figure Series German Army Winter Equipment Infantry Cold Weather Combat Uniform Plastic Model 36304 1/16 No.04

51.71 EUR

Voir

Tamiya Waterline Series Royal Navy Battleship Nelson Plastic Model 77504 1/700 No.602

64 EUR

Voir

Tamiya Military Miniature Series German Infantry Field Meeting 1/35

57.03 EUR

Voir

Tamiya Dinosaur World Series Small Dinosaur Set Plastic Model 60107 1/35 No.07

54.62 EUR

Voir

Tamiya Military Miniature Series Chieftain 1/35

81.88 EUR

Voir

Tamiya Military Miniature Series Japanese Army Infantry Set Plastic Model 35090 1/35 No.90

48.45 EUR

Voir

Tamiya Military Miniature Series German Army Hanomark Armored Personnel Carrier Plastic Model 32564 1/48 No.64 D-type Schützenpanzer

62.67 EUR

Voir

Tamiya Military Miniature Series British Churchill Crocodile Tank Plastic Model 35100 1/35 No.100

86.6 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. A plastic model that requires assembly and painting. Separate adhesive, tools, paint, etc. are required. 1/35 scale unpainted plastic assembly kit Completed size: Total length 228mm Total length when trailer is connected: approx. 340mm The inspection hatch on the trailer can be opened or closed, and some internal cylinders and valves are also reproduced.

Voir

Tamiya Military Collection Series Luftwaffe Crew Winter Set Plastic Model 32412 1/48 No.12 Equipment/Kettenkrad

82.8 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. A plastic model that requires assembly and painting. Separate adhesive, tools, paint, etc. are required. 1/48 scale unpainted plastic assembly kit A set of 1/48 scale figures and accessories essential for creating Luftwaffe scenes. The five winter-equipped figures have rich facial expressions and natural poses for a realistic finish. Kettenkrad, which was often used for towing aircraft and bombs, is also available. A rich set of accessories such as maintenance tools, sentry huts, drum cans and jerry cans. Customer gender: male

Voir

Tamiya Ship Series Japanese Navy Ship Set Plastic Model 78026 1/350 No.26

56.4 EUR

Voir

Tamiya Military Miniature Series US Army Small Arms Set Plastic Model 35121 1/35 No.121

48.42 EUR

Voir

TAMIYA Mini 4WD PRO Super Emperor 18632 1/32 No.32 (MS Chassis)

53.98 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Assembly is a snap-in type that does not require adhesive. Separate tools are required to install the parts. Completed size: total length 152mm, total width 92mm with double shaft motor Dash No. 01/Super Emperor is a machine that became the favorite car of Yonkuro, who leads the Dash corps. *This kit does not include batteries. Two AA batteries are required for operation.

Voir

TAMIYA Masterpiece Series Luftwaffe Fw190 Plastic Model 61037 1/48 No.37 Focke-Wulf A-3

73.73 EUR

Voir

Tamiya Military Miniature Series German Army Infantry Field Meeting Set Plastic Model 35212 1/35 No.212

51.81 EUR

Voir

Tamiya Waterline Series US Navy Battleship Iowa Plastic Model 31616 1/700 No.616

80.77 EUR

Voir

Tamiya German Machine Gunner Air Force Fighter ACE Pilot /

60.8 EUR

Voir

Tamiya Waterline Series Royal Navy Battlecruiser Hood Destroyer North Atlantic Pursuit Operation Plastic Model 31806 1/700 No.806 E-Class

76.94 EUR

Voir

Tamiya Military Miniature Series Japanese Army Officer Set Plastic Model 35341 1/35 No.341

55.17 EUR

Voir

Tamiya Military Miniature Series US Army M151A1 Vietnam War Plastic Model 35334 1/35 No.334

59.18 EUR

Voir

TAMIYA Warbird Collection Japanese Navy Aichi M6A1 Seiran Plastic Model 60737 1/72 No.37

57.14 EUR

Voir

Tamiya Waterline Series German Navy Battlecruiser Gneisenau Plastic Model 77520 1/700 No.120

66.42 EUR

Voir

Tamiya Military Miniature Series German Army Large Military Passenger Vehicle Horch Type 1a Plastic Model 35052 1/35 No.52

61.73 EUR

Voir

Tamiya Waterline Series Japanese Navy Destroyer Hibiki Plastic Model 31407 1/700 No.407

55.32 EUR

Voir

Tamiya Military Miniature Series British Army Infantry Set Plastic Model 35339 1/35 No.339

52.72 EUR

Voir

Tamiya 135 Military Miniature Series No.257 Soviet Army Tank T-55A Plastic Model 35257

80.06 EUR

Plastic models requiring assembly and painting. Separately, tools, paint, etc. are required. Target Age: Kids color: green package weight: 0.449 kg Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Voir

Tamiya Military Miniature Series British Army Cruiser Tank Sento Plastic Model 35232 1/35 No.232 Mk.IV

105 EUR

Voir

TAMIYA Military Miniature Series German Army King Tiger Cannonball Set Plastic Model 35166 1/35 No.166

48.14 EUR

Voir

Tamiya Military Miniature Series US Army Current Vehicle Equipment Set Plastic Model 35266 1/35 No.266

52.31 EUR

Voir

Tamiya Warbird Collection US Army North American Mustang Plastic Model 60749 1/72 No.49 P-51D

58.56 EUR

Voir

Tamiya Military Miniature Series British Army Brengun Carrier Forced Reconnaissance Plastic Model 35249 1/35 No.249

61.52 EUR

Voir

Tamiya Military Miniature Series Germany Horse Riding Set 1/35

50.45 EUR

Voir

TAMIYA Military Miniature Series Tent Set Plastic Model 35074 1/35 No.74

48.47 EUR

Voir

Tamiya World Figure Series German Federal Army Tank Crew Set Plastic Model 36309 1/16 No.09

53.83 EUR

Voir

Tamiya Military Miniature Series German Army Winter Equipment Infantry Attack Set Plastic Model 35256 1/35 No.256

54.1 EUR

Voir

Tamiya Warbird Collection Soviet Air Force Ilyushin Sturmovik Plastic Model 60781 1/72 No.81 IL-2

53.17 EUR

Voir

Tamiya Sports Car Series Rally Mechanic Set Plastic Model 24266 1/24 No.266

61.41 EUR

Voir

TAMIYA Military Miniature Series German Army Kettenkrad Tow Set Infantry Cart with Goliath Plastic Model 32502 1/48 No.02

52.83 EUR

Voir

Tamiya 124 Sports Car Series No.339 Toyoda AA Type Plastic Model 24339

74.15 EUR

Voir

Tamiya Waterline Series US Navy Battleship Missouri Plastic Model 31613 1/700 No.613

83.27 EUR

Voir

Tamiya Waterline Series Russian Navy Nuclear Submarine Kursk Plastic Model 31906 1/700 No.906 (Oscar II)

62.52 EUR

Voir

Tamiya Craft Tool Series Modeling Plate Plastic Model Tool 74150 No.150 (circle 1-12.5mm)

50.71 EUR

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. Supports line carving work using needles Stainless steel template essential for sharp circular molds Great for improving the details of various plastic models, such as re-engraving molds that have disappeared, such as panel lines on scale models, and adding new details. Etched a 0.1m thick stainless steel plate and arranged circles in 0.25mm increments from 1mm to 12.5mm in diameter. By scribing along a circle with a needle, you can carve delicate lines. Size: 89mm x 87mm

Voir

Tamiya 124 Sports Car Series No.348 Nissan Fairlady Z Heritage Edition Plastic Model 24348

77.74 EUR

Plastic models requiring assembly painting. Separately, adhesives, tools, paint, etc. are required. 1/24 scale unpainted plastic assembly kit Size when finished: 175mm in total length/ 77mm in total width The foam and sportiness of the long nose and short deck recreate the interior as it is Can be assembled by selecting domestic specifications and export specifications Highly textured when finished with 2 types of plated parts that are shiny and remove luster Prepare exclusive stripes and sheet patterns as decals Customer Gender: male Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Voir

Tamiya Craft Tool Series No.137 Carbide Carbide Blade 0.3mm Plastic Model Tool 74137

79.36 EUR

A product for advanced users who are familiar with fine detail processing plastic model special blade for stripe carving Combines sharpness and durability Attach it to the optional striped blade holder for detailed operation like a pen Comes with a case that can hold up to 10 Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Voir

TAMIYA Military Miniature Series Soviet Army Infantry Advance Set Plastic Model 35207 1/35 NO.207

57.13 EUR

Voir

Tamiya 135 Military Miniature Series No.127 Israeli Army Merkava Main Battle Tank Plastic Model 35127

71 EUR

Voir

Tamiya 1700 Waterline Series No.223 Japanese Navy Aircraft Carrier Zuikaku Pearl Harbor Attack Plastic Model 31223

76.12 EUR

Voir

Tamiya Military Miniature Series British Army Infantry Patrol Set Plastic Model 35223 1/35 No.221

44.48 EUR

Voir

Tamiya Military Miniature Series US Army Infantry GI Set Plastic Model 35048 1/35 No.48

50.81 EUR

Voir

TAMIYA Military Miniature Series German Army Panzer II Tank Type French Front Plastic Model 32570 1/48 No.70 A~C

62.85 EUR

Voir

Tamiya Military Miniature Series General Set Plastic Model 32557 1/48 No.57

64.37 EUR

Voir

Tamiya Ship Series Royal Navy Battleship King George V Plastic Model 78010 1/350 No.10

105.18 EUR

Voir

Tamiya Warbird Collection Luftwaffe Messerschmitt TROP Plastic Model 60755 1/72 No.55 Bf109E-4/7

56.07 EUR

Voir

Tamiya Military Miniature Series German Army Panzer IV D Type Plastic Model 35096 1/35 No.96

75.99 EUR

Voir

Tamiya Warbird Collection Luftwaffe Messerschmitt Plastic Model 60750 1/72 No.50 Bf109E-3

57.01 EUR

Voir

Tamiya Military Miniature Series German Army Tank Panther G Early Type Plastic Model 35170 1/35 No.170

85.47 EUR

Voir

Tamiya Military Miniature Series US Army M151A2 Ford Matte Kennedy Jeep Plastic Model 35123 1/35 No.123

54.05 EUR

Voir

Tamiya Waterline Series US Navy Battleship New Jersey Plastic Model 31614 1/700 No.614

79.19 EUR

Voir

Tamiya Military Miniature Series German Army Tank Crew Cannonball Loading Set Plastic Model 35188 1/35 No.188

52.27 EUR

Voir

Tamiya 1/12 Motorcycle Series No.10 Suzuki GSX1100S Katana Plastic Model 14010

62.62 EUR

[Product Infomation] Brand : TAMIYA Materials : Plastic [Product Description] ・Package size: 29.5×5.5×19.5(cm) ・Country of origin: Philippines ・Size: Total length = 182 mm ・Target gender: unisex Product introduction It was announced at the Cologne show in 1980 and went on sale in 1981. This is a plastic model assembly kit that reproduces the Suzuki GSX1100S Katana, which caused a sensation with its unique style. A faithful reproduction of Hans Muth's aggressive style. The parallel 4-cylinder DOHC engine with cooling fins gives it a mechanical feel. Ignition cords, brake pipes, meter cables, etc. are also expressed with vinyl pipes for a precise finish. Metal screws are used for the axles and other parts to ensure sufficient strength. Both the front and rear tires are made of solid rubber with a textured texture, and the tread pattern is precisely engraved to tighten your feet. Suzuki's unique star-shaped cast wheels are reproduced in one piece. (From ) safety warning Not applicable [Important Note - For Overseas Customers] Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas. 1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country. 2. About electrical products [Voltage compatible] When using electrical appliances, please be aware that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions. [Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary. [Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product. [About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer. 3. Language and manual Product instructions and displays may only be in Japanese. The English version of the manual can be downloaded from our website. 4. Regarding product returns and exchanges Please note that if you wish to return or exchange an item, you will be required to submit a video of the unpacking process.

Voir

shop by

Prix

Marchand

Marque