DIATOM Bath Mat Water Absorbent Non-Wet Ablution Mat This product, which has Super Absorbent Features, absorbs and traps all the water within 1 minute after water falls on it or is stepped on with wet feet, it does not let the water out, so the feet of the person who will use the mat after you will never get wet. MOPT SINGLE SIZE: 39*60 9MM THICKNESS Diatom mat is NOT a CLASSIC TEXTILE product mat. Diatom mat is a mat designed by taking advantage of the high absorbency properties of diatomite soil. It is produced to be the definitive solution to wetness in front of bathrooms, shower cabins, bathtubs and sinks. Due to its structure, it cannot be bent or bent, it does not break easily, and its texture can be said to be as hard as wood parquet. Your feet will definitely not slip on the diatom mat. Thanks to the super absorbent diatomaceous earth, you will feel the water in your feet being absorbed from under your feet. Once you use the Diatom Mop, you will no longer need to use foot towels that you have to change and wash frequently. You will find the definitive solution to the wetness that occurs in front of the sink and shower cabin. It will put an end to the wetness that frequently occurs especially in homes where ablution is performed in sinks. The use of diatom mats is rapidly increasing in the Far East (countries such as Japan, Korea, Malaysia), Europe and America. Natural diatom bath mat has excellent absorbent properties due to its small and permeable pores. Compared to traditional foot towels and mats, it is *Extraordinarily absorbent, *It dries quickly, *It does not smell, *It does not burn, it is easy to clean, *It is hygienic. *It is antibacterial. *Does not cause mold D ATOM mop USER MANUAL When you open the product, remove dust with a damp cloth. Use on a flat surface. Protect from hard falls. Protect from colored liquids other than water. Otherwise it may cause stains. Depending on the frequency of use, ventilate it vertically at certain times. Do not wear shoes when stepping on the mat. Do not leave the mop in direct sunlight for a long time. When you notice that the absorbency of the product has decreased, sand the surface with sandpaper. In this way, the closed pores on the product surface will be opened again. The product can be cleaned with soapy water and a cloth, but it must be rinsed well and removed from the foam. When the foam or soap dries on the surface, it forms a layer on the surface and clogs the pores, which causes the product to lose its absorbency.. In such a case, clean the surface with sandpaper. The product will return to its previous state. Although the product depends on the frequency of use, it can be used for a minimum of 1 year. It can be used for a longer time as long as the surface is cleaned with sandpaper. NOTE: The product creates a unique smell when used for the first time due to its new nature. but this will disappear after a few days of use.